Advanced vehicle tracker | Internal wiring connection | Installation concealed under dashboard | 4G, 3G, 2G and BLE for TK-EYE | Micro-SIM + eSIM | D/A inputs and outputs
  • Merk: Teltonika
  • Productcode: TK-FMC130
  • Levertijd: In Stock
Om te bestellen en prijzen te kunnen zien moet u zich registreren of inloggen.
To order and view prices you must register or login.

Advanced vehicle tracker | Internal wiring connection | Installation concealed under dashboard | 4G, 3G, 2G and BLE for TK-EYE | Micro-SIM + eSIM | D/A inputs and outputs


  • Teltonika
  • Tracker for vehicles
  • Installation of internal vehicle wiring
  • Connectivity 4G (LTE CaT1), 3G (UMTS/HSPA), 2G (GSM/GPRS) and Bluetooth LE 4.0
  • GNSS positioning
  • Internal antennas
  • Micro-SIM + eSIM and Micro-USB slot 2.0
  • LED indicators
  • Digital and analog inputs and outputs
  • Power supply DC 10-30 V
  • Integrated battery
  • Integrable with AIKO fleet management platform
  • AIKO-LICENSE required for use
  • SIM card required for use



  • Teltonika Tracker
  • Connector with cables


General
Material Plastic
Operating humidity 5% ~ 95% (no condensation)
Protection Suitable for indoor use (IP41)
Sensors Accelerometer
Bluetooth connectivity BLE 4.0 for TK-EYE
Configuration and management FOTA Web, Teltonika Configurator (USB and BLE)
Interface connections 1 x Micro-SIM + eSIM, 1 x Micro-USB 2.0 (configuration)
Mobile connectivity 4G (LTE CaT1), 3G (UMTS/HSPA), 2G (GSM/GPRS)
Power DC 10-30 V with overvoltage protection Battery 3.7 V / 170 built-in mAh
Recommended scenarios Fleet management, Heavy vehicles, Refrigerated vehicles, Vehicle pooling
Vehicle management Suitable for integration with AIKO fleet management platform
Indicators Status and connectivity LEDs
Installation Connection of internal vehicle wiring
Positioning GNSS: GPS, GLONASS, GALILEO, BEIDOU, QZSS, AGPS
Functions Efficient driving, Overspeed, Forced shutdown, Collision detection, Energy-saving modes, Immobilizer, Anti-inhibit
Temp. operation -40 ºC ~ +85 ºC
Inputs 3 x Digital Input (2 configurable to Analog Input): negative and impulse 1 x CAN adapter input 1 x Input 1-Wire
Dimensions 65 (W) x 56.6 (H) x 20.6 (D) mm
Outputs 3 x Digital Output